Redback A4387A Phase 5 250W 100V 3 Input Public Address Amplifier
Our Price (inc. GST):
$1,990
Average Retail:
$2,490
You Save:
$500
Quantity in stock
2
Freight Cost:
Syd:
$37.52
Melb:
$47.99
Full Australian Warranty
Australian Distributors
Product is in a sealed box
Description
Redback A4387A Phase 5 250W 100V 3 Input Public Address Amplifier
This model was created for installations requiring the power of the Phase5 amplifier with fewer 'bells and whistles'. It still offers three mic and auxiliary inputs, alert/evac option, phantom powering, VOX muting and 24V DC power option. 250W RMS power output is ideal for powering long strings of 100V line speakers in larger installations such as shopping centres.
The Redback A 4387A 250 Watt 3 channel mixer amplifier is specifically designed for applications requiring up to three microphone inputs, without compromising output power and overall performance. The amplifier features three inputs which can be configured for either microphone or line level operation.The Redback A 4387A 250 Watt 3 channel mixer amplifier is specifically designed for applications requiring up to three microphone inputs, without compromising output power and overall performance. The amplifier features three inputs which can be configured for either microphone or line level operation.
The A 4387A conservatively delivers 250W RMS power. Frequency response extends from 50Hz to 15kHz ±3dB at a total harmonic distortion (THD) of less than 0.5% @ 1kHz.
Vox muting is provided on inputs one and two, which, when activated, automatically mutes the other inputs. Bass and treble controls and phantom powering capability enable unparalleled flexibility for a wide scope of applications such as factories, workshops, mine sites, sports clubs and office buildings.
The amplifiers operate from 240V AC mains or 24V DC permitting battery backup operation during mains power failure. The output comes standard suitable for a 100V line load, but this can be configured internally to 70V line or low impedance (4 – 16O) loads.
Thermal overload, overcurrent and overload protection circuitry and fuses on both AC and DC provide excellent fault condition protection and robust performance. The amplifier also utilises a half power mode which enables the amplifier to continue to run at a reduced output level if it is being over driven.
Tape output sockets are provided for recording purposes or feeding into additional power amplifiers.
The A 4387A conservatively delivers 250W RMS power. Frequency response extends from 50Hz to 15kHz ±3dB at a total harmonic distortion (THD) of less than 0.5% @ 1kHz.
Vox muting is provided on inputs one and two, which, when activated, automatically mutes the other inputs. Bass and treble controls and phantom powering capability enable unparalleled flexibility for a wide scope of applications such as factories, workshops, mine sites, sports clubs and office buildings.
Warranty
This product is sourced in Australia and carries a full Australian Manufacturers Warranty